LICA Model 470 PLUS Safety Boot

The LICA 470PLUS Safety Boot combines dielectric protection, impact resistance, and puncture protection in a single industrial safety boot. Unlike conventional dielectric footwear that provides insulation only at specific points, the 470PLUS is manufactured without any metal or conductive components, delivering electrical hazard protection up to 14,000 volts.

It features a composite (polyamide) toe cap capable of withstanding impacts of up to 200 J, along with a polyurethane insole reinforced with Kevlar® to protect the sole of the foot against sharp objects. Its dual-density PU/PU outsole is slip-resistant and resistant to water, oils, and hydrocarbons.

Manufactured using European direct-injection technology, the 470PLUS is a reliable choice for professionals in construction, industrial maintenance, manufacturing, logistics, and the electrical industry who require comprehensive protection and all-day comfort during demanding work shifts.

Recommended Applications

• Electrical installations, substations, and high-voltage environments requiring certified dielectric protection up to 14,000 volts.
• Industrial workplaces with the risk of falling objects or toe impacts, thanks to its 200 J composite toe cap.
• Areas where sharp objects may be present on the floor, protected by the Kevlar® anti-puncture insole.
• Construction, industrial maintenance, manufacturing, warehousing, logistics, and general workshop operations.

Not Recommended For

• Areas with static electricity accumulation.
• Environments containing explosive gases or substances.
• Foundries or high-temperature furnace operations.
• Welding, boilermaking, or other hot-work applications.

Specifications

• Brand: LICA
• Model: 470PLUS
• Protective Toe Cap: Composite (Polyamide), impact resistant up to 200 J
• Electrical Hazard Protection: Up to 14,000 volts (metal-free construction)
• Insole: Polyurethane with Kevlar® anti-puncture protection
• Upper: Polyester
• Lining: Polyester
• Outsole: Dual-density PU/PU, slip-resistant
• Manufacturing Process: Direct Injection to the Upper
• Last: EEE
• Color: Black with gray accents
• Sizes: MX 23–30
• Approximate Weight: 580 g per boot (approximately 1,160 g per pair)
• Protection Type: PP + D + RP (Protective Toe Cap + Dielectric Protection + Puncture Resistance)
• Certification: NOM-113-STPS-2009

Care Instructions

• Clean the outsole with water, mild soap, and a soft brush. Rinse thoroughly and dry with a clean cloth.
• Clean the entire upper using a damp cloth with mild soap and water, removing excess moisture before allowing it to dry completely.
• Remove the insole periodically for cleaning, and allow both the insole and the boots to air dry naturally in the shade before reuse.